|
- Provides the primary platform for distribution of high speed subscriber services
- Provides two Switch Module slots (SM A and SM B), a System Controller Module slot (SCM), and 6 module slots (1 to 6)
Contact your sales representative for information regarding software
Blank Face Plate
|
- Covers one module slot on the rear of the Total Access 5000
chassis
|
Cables
|
|
| Part Number: 11961000JL100 |
|
|
- 32-pair, 26 AWG cable with "Cat-5 type" twist for high bit rate applications
- Has a male champ connector on one end and an unterminated stub on the other
- Intended for use with Total Access 5000 modules which have "Cat5 type" champ terminations, as opposed to conventional champ terminations
|
|
|
| Part Number: 11961000JL150 |
|
|
- 32-pair, 26 AWG cable with "Cat-5 type" twist for high bit rate applications
- Has a male champ connector on one end and an unterminated stub on the other
- Intended for use with Total Access 5000 modules which have "Cat5 type" champ terminations, as opposed to conventional champ terminations
|
|
|
| Part Number: 11961000JL050 |
|
|
- 32-pair, 26 AWG cable with “Cat-5 type” twist for high bit rate applications
- Has a male champ connector on one end and an unterminated stub on the other
- Intended for use with Total Access 5000 modules which have “Cat5 type” champ terminations, as opposed to conventional champ terminations
|
|
|
- A single 15-foot, 100-Pair cable
- Supports up to three Total Access 5000 ADSL2+ 32-Port Access Modules or three Splitter ADSL2+ 32-Port Access Modules
|
|
|
- A single 15-foot, 100-Pair cable
- Supports up to three Total Access 5000 ADSL2+ 32-Port Access Modules or three Splitter ADSL2+ 32-Port Access Modules
|
|
|
- One 15-foot, 100-Pair cable
- Supports up to four Total Access 5000 Combo A2+ 24-Port, RPOTS 24- Port, or Combo V2 24-Port Access Modules
|
Fan, Filter and Housings
|
|
- Used in conjunction with the Fan Module (P/N 1187090E1) to provide
forced filtered air ventilation for the Total Access 5006 chassis and
components
|
|
|
| Part Number: 1187090E1 |
CLEI: BVC1AAUE_ _
|
|
- Consists of a sheet metal tray that holds two fans rated at a nominal -48 VDC
- Fan Module is mounted from the front of the chassis and is installed into the fan compartment on the left side of the Total Access 5006 Chassis (P/N 1187003E1)
- Designed to provide forced air ventilation to cool a fully populated chassis
|
|
|
| Part Number: 1187090G3 |
CLEI: BVC1ABSE_ _
|
|
- Consists of a sheet metal tray that holds two fans rated at a nominal -48 VDC
|
Mounting Bracket
|
|
- Provides the equipment necessary to install the Total Access 5006 chassis onto a wall or other vertical surface
- Accommodates:
- One Total Access 5006 Chassis, 19 inch (P/N 1187003E1)
- Lineage SPS DC Power Chassis
|
SFPs
|
|
- Part numbers 1442707G1 - 1442707G44
- Full duplex serial electric, serial optic device with both transmit and receive functions contained in a single module
- Operates on various optical channels. Refer to product documentation for part numbers, channels, and wave lengths that are supported
|
|
|
- Full duplex serial electric, serial optic device with both transmit and receive functions contained in a single module
- Supports operations over a wide temperature range, and are suitable for use in outside plant environments
- Provides a high speed serial link at 11.3 Gbps to support SONET/SDH, Ethernet, OTN and Fiber Channel
- Operates on various optical channels
|
|
|
- Small Form-Factor Pluggable Long Reach 10 GigE LR-2 DWDM 80 km Extended Temperature XFP is a full duplex serial electric, serial optic device with both transmit and receive functions contained in a single module
|
|
|
| Part Number: 1442300G1 |
CLEI: SOOTAK9J_ _
|
|
- Copper SFP that plugs into an ADTRAN GigE Copper interface designed to accept SFPs
- Provides a 10/100/1000 Mbps full duplex data-link
|
|
|
| Part number |
Wavelength (nm) |
CLEI |
| 1442971G1 |
1471 |
BVL3A1JDAA |
| 1442971G2 |
1491 |
BVL3A1KDAA |
| 1442971G3 |
1511 |
BVL3A1LDAA |
| 1442971G4 |
1511 |
BVL3A1MDAA |
| 1442971G5 |
1551 |
BVL3A1NDAA |
| 1442971G6 |
1571 |
BVL3A1PDAA |
| 1442971G7 |
1591 |
BVL3A1RDAA |
| 1442971G8 |
1611 |
BVL3A1SDAA |
|
|
|
| Part Number: 1442390G1 |
CLEI: BVL3AFGD_ _
|
|
- Single-mode fiber SFP that plugs into ADTRAN Gigabit Ethernet modules designed to accept SFPs
- Designed for use in Dense Wavelength Division Multiplexing (DWDM) applications
|
|
|
| Part Number: 1442390G2 |
CLEI: BVL3AFHD_ _
|
|
- Single-mode fiber SFP that plugs into ADTRAN Gigabit Ethernet modules designed to accept SFPs
- Designed for use in Dense Wavelength Division Multiplexing (DWDM) applications
|
|
|
- Part number: 1442912F1, TX Wavelength: 1320-1340nm, RX Wavelength: 1260-1280nm, CLEI: BVL3A1CD__
- Part number: 1442912F2, TX Wavelength: 1260-1280nm, RX Wavelength: 1320-1340nm, CLEI: BVL3A1DD__
- Plugs into ADTRAN equipment designed to accept Extended Form factor Pluggables (XFPs)
- Provides a 10 G optical interface to the supporting system
|
|
|
- Part number: 1442922F1, TX Wavelength: 1320-1340nm, RX Wavelength: 1260-1280nm, CLEI: BVL3A1ED__
- Part number: 1442922F2, TX Wavelength: 1260-1280nm, RX Wavelength: 1320-1340nm, CLEI: BVL3A1FD__
- Plugs into ADTRAN equipment designed to accept Extended Form factor Pluggables (XFPs)
- Provides a 10 G optical interface to the supporting system
|
|
|
- Part number: 1442942F1, TX Wavelength: 1320-1340nm, RX Wavelength: 1260-1280nm, CLEI: BVL3A1GD__
- Part number: 1442942F2, TX Wavelength: 1260-1280nm, RX Wavelength: 1320-1340nm, CLEI: BVL3A1HD__
- Plugs into ADTRAN equipment designed to accept Extended Form factor Pluggables (XFPs)
- Provides a 10 G optical interface to the supporting system
|
Surge Protection
|
|
| Part Number: 1192PP168VLx |
|
|
- Designed to protect the associated Total Access 5000 Chassis and components by shunting to ground lightning strike surges or other electrical surges seen on any of the customer loops
- Supported Part Numbers:
- 1192PP168VL1, 710 splice module
- 1192PP168VL2, MS2 splice module
- 1192PP168VL3, 710 splice module
- 1192PP168VL4, MS2 splice module
|
|
|
