|
- Front-access chassis that provides the primary platform for distribution of high speed subscriber services
- Incorporates a Switch Module Input/Output (SMIO3) and provides two Switch Module slots, a System Controller Module slot, and 6 module slots for use with access and/or line modules
Contact your sales representative for information regarding software
Blank Face Plate
|
- Covers one module slot on the rear of the Total Access 5000
chassis
|
Cables
|
- A 0.4 mm cable for front access applications
- Has a female connector on one end and an unterminated stub on the opposite end
|
|
- A 0.4 mm cable for front access applications
- Has a female connector on one end and an unterminated stub on the opposite end
|
|
- A 0.4 mm cable for front access applications
- Has a female connector on one end and an unterminated stub on the opposite end
|
|
- A 0.4 mm cable for front access applications
- Has a female connector on one end and an unterminated stub on the opposite end
|
Connectors and Adapters
|
- Passive optical multiplexer/ demultiplexer for Coarse Wavelength Division Multiplexing (CWDM) applications
- Multiplexes/demultiplexes up to four CWDM wavelengths plus 1310 nm over a single fiber
|
Fan, Filter and Housings
|
- Consists of a sheet metal tray that holds three fans rated at a nominal -48 VDC
- Designed to provide forced air ventilation to cool a fully populated chassis
|
SFPs
|
- Part numbers 1442707G1 - 1442707G44
- Full duplex serial electric, serial optic device with both transmit and receive functions contained in a single module
- Operates on various optical channels. Refer to product documentation for part numbers, channels, and wave lengths that are supported
|
|
- Full duplex serial electric, serial optic device with both transmit and receive functions contained in a single module
- Supports operations over a wide temperature range, and are suitable for use in outside plant environments
- Provides a high speed serial link at 11.3 Gbps to support SONET/SDH, Ethernet, OTN and Fiber Channel
- Operates on various optical channels
|
|
- Small Form-Factor Pluggable Long Reach 10 GigE LR-2 DWDM 80 km Extended Temperature XFP is a full duplex serial electric, serial optic device with both transmit and receive functions contained in a single module
|
|
Part Number: 1442300G1 |
CLEI: SOOTAK9J_ _
|
|
- Copper SFP that plugs into an ADTRAN GigE Copper interface designed to accept SFPs
- Provides a 10/100/1000 Mbps full duplex data-link
|
|
Part number |
Wavelength (nm) |
CLEI |
1442971G1 |
1471 |
BVL3A1JDAA |
1442971G2 |
1491 |
BVL3A1KDAA |
1442971G3 |
1511 |
BVL3A1LDAA |
1442971G4 |
1511 |
BVL3A1MDAA |
1442971G5 |
1551 |
BVL3A1NDAA |
1442971G6 |
1571 |
BVL3A1PDAA |
1442971G7 |
1591 |
BVL3A1RDAA |
1442971G8 |
1611 |
BVL3A1SDAA |
|
|
Part Number: 1442390G1 |
CLEI: BVL3AFGD_ _
|
|
- Single-mode fiber SFP that plugs into ADTRAN Gigabit Ethernet modules designed to accept SFPs
- Designed for use in Dense Wavelength Division Multiplexing (DWDM) applications
|
|
Part Number: 1442390G2 |
CLEI: BVL3AFHD_ _
|
|
- Single-mode fiber SFP that plugs into ADTRAN Gigabit Ethernet modules designed to accept SFPs
- Designed for use in Dense Wavelength Division Multiplexing (DWDM) applications
|
|
- Part number: 1442912F1, TX Wavelength: 1320-1340nm, RX Wavelength: 1260-1280nm, CLEI: BVL3A1CD__
- Part number: 1442912F2, TX Wavelength: 1260-1280nm, RX Wavelength: 1320-1340nm, CLEI: BVL3A1DD__
- Plugs into ADTRAN equipment designed to accept Extended Form factor Pluggables (XFPs)
- Provides a 10 G optical interface to the supporting system
|
|
- Part number: 1442922F1, TX Wavelength: 1320-1340nm, RX Wavelength: 1260-1280nm, CLEI: BVL3A1ED__
- Part number: 1442922F2, TX Wavelength: 1260-1280nm, RX Wavelength: 1320-1340nm, CLEI: BVL3A1FD__
- Plugs into ADTRAN equipment designed to accept Extended Form factor Pluggables (XFPs)
- Provides a 10 G optical interface to the supporting system
|
|
- Part number: 1442942F1, TX Wavelength: 1320-1340nm, RX Wavelength: 1260-1280nm, CLEI: BVL3A1GD__
- Part number: 1442942F2, TX Wavelength: 1260-1280nm, RX Wavelength: 1320-1340nm, CLEI: BVL3A1HD__
- Plugs into ADTRAN equipment designed to accept Extended Form factor Pluggables (XFPs)
- Provides a 10 G optical interface to the supporting system
|
|
|