• About ADTRAN
  • Products
  • Solutions
  • Support
  • Training
  • Partners
  • My ADTRAN

Total Access 850 Chassis

Part Number:
1200375L1


Total Access 850 is a modular Integrated Access Device (IAD) with 2 common slots, 8 access slots for integrated voice and data applications
  • Cost-effective T1 TDM or T1 ATM IAD depending on the controller module installed
  • Supports voice-only or voice and data (up to 24 FXS/FXO interfaces) applications
  • Integral FT1/DSX-1 port (activated by BCU L2 or RCU)
  • Integral IP router (10/100Base-T Ethernet interface), SNMP, and V.35 Nx56/64 interface for integrated data support and Internet access activated with any version of the RCU
  • Special AB slot for Nx56/64 data module (activates V.35 DTE when BCU L1/L2 is installed in system controller slot)
  • 50-pin female Amphenol connector for subscriber loop terminations
  • Total Access 850 requires two common modules, a PSU, and a BCU or RCU for operation
  • 48 VDC (Optional external 115 VAC, 50 watts)

Software
No software is currently available for this product

Accessories
Accessories

Part Number: 3353002    
  • 50-position prewired ?66?-type Punch Down Block
  • Includes mounting bracket and designation cover
  • 50-pin female Amphenol connector
Part Number: 1175099L1    
  • Blank module plug used for covering open slots
Part Number: 1200927G8    
  • Breakout box providing RJ-21M (50-pin amp) to 8 RJ-48 ports
  • Eliminates the need for punch-down block and cable for installs requiring less than 8 analog ports
  • RoHS 5-of-6 compliant
Part Number: 1200927L8    
  • Breakout box providing RJ-21M (50-pin amp) to 8 RJ-48 ports
  • Eliminates the need for punch-down block and cable for installs requiring less than 8 analog ports
Part Number: 1800001L1    
  • Installation kit for use with the Total Access 600, 850 and 900/900e Series products
  • Includes Punch Down Block (3353002) and 10-foot, 50-pin male to male cable (3353102)
Part Number: 1800002L1    
  • Installation kit for use with the Total Access 600, 850 and 900/900e Series products
  • Includes Punch Down Block (3353002) and 6-foot, 50-pin male to male cable (3353102)
  • Includes 25 foot Cat 5e Ethernet cable
Power Supplies

Part Number: 1175043L3    
  • Provides an AC power source for DC-powered Total Access chassis
  • Integral charging circuit for Total Access battery backup systems
  • Mounts to side of Total Access 750/850 chassis or battery backup system
  • FCC, NEBS Level 3, and UL 1950 compliant
  • Compact with modular connections, status LED, auxiliary ground stud, and user accessible fuse
  • Provides uninterrupted 48VDC power output when battery backup system (1175044Lx) connected
Rackmount Brackets & Mounting Hardware

Part Number: 1175045L1    
  • One set of brackets used for mounting a single TA 850 into a 19" rack
  • Used to rackmount 8.5-inch Total Access 850 chassis and Battery Backup System
Part Number: 1175046L1    
  • One set of brackets used for mounting a single TA 850 into a 23" rack
  • Used to rackmount 8.5-inch Total Access 850 chassis and Battery Backup System